JRE Home Page








JRE Needle Valves are precisely machined to produce superior quality & excellent performance. Close quality inspections are carried out at every stage of production in order to maintain high quality standards. Design points are as under:
  1. Straight & Angle Pattern.
  2. Precision Machined Stainless Steel Stem
  3. Rugged & Compact Square Forged Body.
  4. Longer life with minimum maintainence
  5. Low operation Torque
  6. Valves with Double Ferrule Tube Fittings.
Sizes : 1/8" to 1" (3mm to 25mm)
END CONNECTIONS:
  1. Screwed to BSP, BSPT & NPT
  2. Socket Weld
  3. Double Ferrule Tube Fitting
Material :
  1. Forged Carbon Steel body with SS Parts
  2. Forged Brass body with SS Parts
  3. SS 304 Bar Stock only
  4. SS 316 Bar Stock only
Temprerature :
Suitable for process temperature upto 225° C

Working Pressure :
  1. 3000 PSI or 205 kg/cm²
  2. 4000 PSI or 275 kg/cm²
  3. 5000 PSI or 350 kg/cm²
  4. 6000 PSI or 410 kg/cm²
Applications :
Wide applications on fluid line connections like air, steam Gases, liquids, oils etc. used in - LABBORATORIES, HYDRAULIC SYSTEMS, INSTRUMENTATION, PROCESS CONTROL SYSTEMS IN POWER PLANTS, REFINERIES, & TEST BENCHES ETC.







Click to enlarge
Manufactures wide range of Ballvalves that are Very Precisely machined to produce Superior Quality & Excellent Performance. Strict Quality Checks & Close Inspections are carried out at each & every stage of Production in order to maintain high Quality standards.

Ballvalves are designed to provide:-
  • Rugged Construction, Compactness & high flow capacity with Precisely machined & smoothened bore to eliminate Scale formation.
  • Available in Both Solid Bar stock & Investment Casting Type also.
  • Available in Full bore & Regular Port type in Single & Three Piece Construction, Square Forged & Round body design.
  • S.S. Balls & Internals with Virgin PTFE Seat & Seal to give longer life with minimum maintenance
  • Positive & Leakproof Shutoff with Quarter turn Operation & Low Operation Torque.
  • Suitable for Process Temperature from -25* C to 225* C
  • Available in wide Choice of Material, Sizes & End Connections depending on various Service Applications.
Ballvalves are Used in:-
  • Fluid line Connections for Air, Water, Steam, Gases, Liquids, Oil etc.
  • Refineries, Chemical, Petrochemical, Fertilizer & Food Processing Industries.
  • Processing Plants, Paper & Pulp Industries, Bulk Drugs & Pharmaceutical Industries.
  • Hydraulic & Pneumatic Equipments, Test Benches, Instrumentation Systems & Manifolds

SINGLE PIECE SQUARE FORGED BODY HIGH PRESSURE DESIGN

Size Range : 1/4" to 1"

Test Pressure : 700 kg/cm² (10,000 PSI)
SINGLE PIECE SQUARE FORGED BODY MEDUIM PRESSURE DESIGN

Size Range : 1/8" to 2"

Test Pressure : Upto 330 kg/cm² (5,000 PSI)
THREE PIECE SQUARE FORGED BODY DESIGN

Size Range : 1/4" to 3"

Test Pressure : 100 kg/cm² (1,500 PSI)
3-WAY & 4-WAY BALLVALVE WITH "T" & "L" PORT DESIGN

Size Range : 1/4" to 1"

Test Pressure : 133 kg/cm² (2,000 PSI)
SINGLE PIECE HEX BODY DESIGN

Size Range : 1/4" to 1"

Test Pressure : 100 kg/cm² (1,500 PSI)
SINGLE PIECE ROUND BODY DESIGN

Size Range : 1/8" to 8"

Test Pressure : 100 kg/cm² (1,500 PSI)
SINGLE PIECE ROUND BODY DESIGN

Size Range : 1/2" to 8"

Test Pressure : 20 kg/cm² (300 PSI)
THREE PIECE ROUND BODY DESIGN

Size Range : 1/2" to 8"

Test Pressure : 33 kg/cm² (500 PSI)
Back to the Top